rev: 3 .0 created on: june 3, 2015 created by: mks approved by: bp page | 1 wpant30100 - s 1 a high efficiency 4g & ism body - mount antenna description / application this is a 4g / 3g & ism band high efficiency omni directional body - mount antenna. it is ideal for mounting on any metal structures / surfaces. compact size and impressive efficiency are the key features of this proprietary design. it comes with a 10?? long rg316 cable and a sma male connector . we can assist your engineers to optimize mounti ng positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as trp/tis and fcc requirements. we specialize in developing customized antenna solutions . please contact sales@worldproducts.com with your specific application requirements. electrical properties operating frequency 698 ? 9 60 mhz 1710 ? 27 00 m hz approximate antenna impedance [ ? ] 50? 50? vswr ? typical * < 3 :1 < 3 :1 peak gain [dbi] (typical) * 2.5 dbi 3.5 dbi efficiency [%] (typical) * 8 0 % 70 % polarization linear linear pattern near omni - d irectional ; also depends on installation near omni - d irectional ; also depends on installation accepted power [w] (max) 2 watts 2 watts * note : rf performance metrics recorded with antenna placed on top of a metal box. mechanical / environmental properties antenna dimensions 3.2?? x 1.2?? x 1.2?? (81mm x 30mm x 30mm) antenna color cool grey cable 10?? long rg316 connector straight sma male antenna radome abs + polycarbonate washer & other outer metal parts stainless steel main gasket covering the base 1.5mm thick black 3m gasket connector plating nickel + chromium alloy operating / storage temperature - 40 o c to +90 o c environmental meets standards for ul 94v -0 hazardous materials rohs compliant
rev: 3 .0 created on: june 3, 2015 created by: mks approved by: bp page | 2 picture s of the antenna note: prototype shown here . the actual antenna will have 10?? long cable with straight sma male connector.
rev: 3 .0 created on: june 3, 2015 created by: mks approved by: bp page | 3 the antenna can be mounted on an l - shaped stainless steel bracket (shown in the picture above) for pole / wall mount applications. note: the antenna does not include the mount. it can be ordered separately (p/n: wpant50018 - s2a).
|